1. The utility model provides an integrated form heat preservation removes room, includes the room body (1) and filters filter plate (4), its characterized in that: the energy storage box body (3) is mounted at the top of the house body (1), the cross section of the energy storage box body (3) is a right-angled triangle, and a C-shaped traction marking frame (5) is mounted on the outer wall of one side of the house body (1);

the house is characterized in that a rubber cover (501) is installed on the surface of one side, close to a house body (1), of a traction mark frame (5) in an embedded mode, three groups of compression springs (502) which are arranged in parallel are installed on the inner wall of the rubber cover (501), three groups of pressure sensors (503) which are arranged in parallel are installed on the surface of one side, close to the house body (1), of the traction mark frame (5), the installation positions of the pressure sensors (503) correspond to the compression springs (502) one by one, one end of each compression spring (502) is correspondingly connected with the surface of each pressure sensor (503), a GPS (global positioning system) positioner (504) is installed on the surface of one side, close to the house body (1), of the traction mark frame (5), and the GPS (504) is located between the two groups of pressure sensors (503);

the water storage frame body (6) is installed on the outer wall of one side of the house body (1), the water storage frame body (6) is located below the traction mark frame (5), and the screening filter plate (4) is installed in the water storage frame body (6) in an embedded mode.

2. The integrated heat-preservation mobile house according to claim 1, characterized in that: spare signal board (8) are installed to one side inner wall of the room body (1), one side surface mounting that the room body (1) was kept away from in spare signal board (8) has time-recorder (801), inquiry terminal (802) and signal intensifier (803), and inquiry terminal (802) are located the centre of time-recorder (801) and signal intensifier (803), time-recorder (801) and signal intensifier (803) electric connection.

3. The integrated heat-preservation mobile house according to claim 1, characterized in that: transformer (301) are installed to the inside diapire of energy storage box body (3), solar cell panel (302) are installed to the inner wall of energy storage box body (3), and solar cell panel (302) and transformer (301) electric connection, protection casing (303) are installed at the top of energy storage box body (3).

4. The integrated heat-preservation mobile house according to claim 1, characterized in that: the house body (1) comprises waterproof layer (101), steel sheet (102) and buckled plate (103), the surface mounting of steel sheet (102) has waterproof layer (101), the interior surface mounting of steel sheet (102) has thermal insulation wall body (2), the interior surface mounting of thermal insulation wall body (2) has buckled plate (103).

5. The integrated heat-preservation mobile house according to claim 4, characterized in that: thermal insulation wall (2) comprises heat preservation cotton board (201), insulation board (202) and electric heating board (203), insulation board (202) are all installed to the both sides surface of electric heating board (203), one side surface mounting that electric heating board (203) were kept away from in insulation board (202) has heat preservation cotton board (201), and keeps away from one side surface of insulation board (202) and the surface connection of buckled plate (103) in heat preservation cotton board (201), electric heating board (203) and transformer (301) electric connection.

6. The integrated heat-preservation mobile house according to claim 1, characterized in that: universal wheel (7) are all installed in the bottom four corners of the room body (1), flush mounting plate of switch (10) is installed to one side inner wall of the room body (1), and flush mounting plate of switch (10) is located the below of reserve signal board (8), the surface mounting of flush mounting plate of switch (10) has three parallel arrangement's of group control on & off switch key.

7. The integrated heat-preservation mobile house according to claim 1, characterized in that: the active carbon otter board is installed to the inner wall of screening filter plate (4), the internally mounted of screening filter plate (4) has gomphosis slot (401), and the inside of gomphosis slot (401) is equipped with the slot that three groups equidistance were arranged, the inside of gomphosis slot (401) is installed bushing (402), bushing (403) and bushing (404) No. three through-holes through the slot gomphosis, and bushing (402) and bushing (404) are located rear and the place ahead of bushing (403) No. two respectively, the inside of bushing (402), bushing (403) and bushing (404) No. three all is equipped with the through-hole, the inside through-hole diameter of bushing (402), bushing (403) and bushing (404) No. three reduces in proper order.

8. The integrated heat-preservation mobile house according to claim 1, characterized in that: the inside of the water storage frame body (6) is divided into a water collecting area (601) and a water purifying area (602) through the screening filter plate (4), and the water purifying area (602) is positioned in front of the water collecting area (601).

9. The integrated heat-preservation mobile house according to claim 1, characterized in that: the novel lamp house is characterized in that a recessed through groove (9) is formed in the top of the house body (1), a rotary fan (902) is installed on the inner top wall of the through groove (9), two groups of ultraviolet lamp tubes (903) which are symmetrically arranged in the front and back are installed on the inner wall of the through groove (9), the two groups of ultraviolet lamp tubes (903) are located in the front and back of the rotary fan (902) respectively, two groups of lighting lamp tubes (901) which are symmetrically arranged in the front and back are installed on the inner wall of the through groove (9), the two groups of lighting lamp tubes (901) are located in the front and back of the ultraviolet lamp tubes (903) respectively, and the lighting lamp tubes (901), the rotary fan (902) and the ultraviolet lamp tubes (903) are electrically connected with three groups of control switch keys on the surface of the switch panel (10) respectively.

10. The integrated mobile insulated building according to any one of claims 1 to 9, characterized in that the working steps of the device are as follows:

s1, when the house body (1) is used as an integrated mobile house to live in, after light energy is converted into electric energy through the solar panel (302), corresponding boosting treatment is carried out through the transformer (301), and the electric energy can be boosted to 220V civil voltage, so that the voltage requirement when the resident people in the house body (1) use electricity is met, in addition, the access of a power supply wire can be avoided, and the overall load of the house body (1) and the cable laying cost are reduced;

s2, when the residents need to be intensively transferred in case of sudden natural disasters, the residents can be intensively transferred into the house bodies (1) in batches, a plurality of groups of the house bodies (1) are hooked and combined through the hooking ropes, then one end of each traction rope is wound on the surface of the traction mark frame (5) on the surface of the house body (1) at the outermost end, and the other end of each traction rope is connected to the tail end of a traction vehicle, so that the centralized transfer can be realized;

s3, in the process of centralized transfer, the traction rope and the hooking rope can extrude and drag the rubber cover (501) and the compression spring (502), under the elastic action of the compression spring (502), the dragging action of the traction rope and the hooking rope on the traction mark frame (5) can be weakened, the traction mark frame (5) can be ensured to be well stored on the surface of the house body (1), in addition, once the traction rope and the hooking rope are broken, the corresponding connection and traction action between the house body (1) and between the house body (1) and a traction vehicle is lost, so that the pressure sensor (503) can send an abnormal warning to an integrated system in the traction vehicle when detecting that the extrusion action from the compression spring (502) is zero, a driver of the traction vehicle can be prompted to know the phenomenon of falling behind, and according to the positioning information displayed by the GPS positioner (504), the driver can conveniently and quickly find the falling room body (1);

s4, when the house is intensively transferred, the house is influenced by natural disasters, communication signals are weakened in the transfer process and cannot be in contact with the outside, at the moment, people in the house body (1) can inquire whether an operator base station exists nearby through an inquiry terminal (802), if the operator base station exists, a signal enhancer (803) can be started, after communication network signals are enhanced, the people can get in contact with different places through communication tools such as mobile phones and the like, the current safety state is indicated, in the process, the timer (801) can control the starting time of the signal enhancer (803), and radiation brought by long-time use of the signal enhancer (803) and communication interference influence on other areas are avoided;

s5, in the transferring process, people in the house body (1) are concentrated, and the ultraviolet lamp tube (903) and the rotary fan (902) can be started, so that the sterilization and ventilation treatment of the inner space of the house body (1) can be realized, and the occurrence of the germ infection condition is avoided;

s6, when the water-saving rainwater collection device is transferred to a parking place, collected rainwater can be stored in the water collection area (601), and after being intercepted by the screening filter plate (4), water in the water collection area (601) is transferred to the inside of the water purification area (602) through the screening filter plate (4), so that the water-saving rainwater collection device is convenient for people to use;

s7, when the temperature is lower at night, the electric heating plate (203) can be started, the temperature rise treatment is carried out on the interior of the house body (1), the wind cold caused by the excessively low temperature of the interior of the house body (1) is avoided, the electric heating plate (203) can be insulated and isolated through the heat insulation cotton plate (201), and then the heat exchange between the house body (1) and the external environment is prevented, so that the power consumption is saved.

Background

The movable house is an assembled and movable living house body, has the effects of living and moving, is high in flexibility, and is used in the industrial fields of national environmental public toilets, sanitation facilities, light steel houses, wood house field construction and the like, people in disaster areas need to be intensively transferred when natural disasters occur, integrated traction transfer can be realized through the movable house, the transfer efficiency is improved, and the comfort degree of the transferred people in the transfer process is also ensured.

The existing mobile house has the following defects:

1. the reference CN213418068U discloses a spliced mobile house with fireproof function, which comprises a mobile house inner wall surface, wherein the front outer side of the mobile house inner wall surface is in contact connection with a transverse fixed light steel keel, the inner side of one end of the transverse fixed light steel keel is in contact connection with an expansion screw, the outer side of the rear end of the expansion screw is fixedly connected with the inner side of one end of the mobile house inner wall surface, the outer side of the front end of the transverse fixed light steel keel is fixedly connected with a fixed clamping bracket, the inner side of one end of the fixed clamping bracket is in contact connection with a first locking screw, the outer side of the front end of the transverse fixed light steel keel is in contact connection with a detachable clamping bracket, the inner side of one end of the detachable clamping bracket is in contact connection with a second locking screw, in the utility model, the fireproof plate can be clamped and fixed through a corner connecting bracket assembly and a linear connecting bracket assembly, meanwhile, the fireproof board has a certain earthquake-resistant function after being installed, but the mobile house cannot realize centralized traction transfer and lacks a corresponding positioning structure in the transfer process, so that the mobile house is inconvenient to find quickly after falling behind;

2. reference CN210597626U discloses a mobile house with folding storage, which comprises: the mobile house is provided with a baffle frame at the bottom; the take-up box is arranged on the right side of the mobile house; the folding mechanism is arranged on the inner side of the baffle frame and is provided with a turning plate, and the turning plate is arranged at the bottom of the mobile house; the first threading buckle, the second threading buckle and the pulley are arranged at the bottom of the mobile house; one end of the wire rope is arranged in the wire winding box; the left baffle is arranged on the left side of the turning plate; the right baffle is arranged on the right side of the turning plate; the inserting plate is connected with the left baffle plate; the bottom plate is arranged at the bottom of the turning plate. The utility model has the advantages of redundant space for storing furniture, preventing rainwater infiltration and having good wind resistance, but the mobile house can not provide effective signal enhancement service in the environment with poor communication signals such as the field, thereby ensuring the technical support of communication with the outside and easily causing the loss of connection phenomenon;

3. the reference document CN209874061U discloses a container type mobile house, which comprises a mobile house top plate, a jacking device and a locking mechanism, wherein two sides of the lower end of the mobile house top plate are fixedly connected with folding side plates, one ends of the folding side plates, far away from the mobile house top plate, are fixedly connected with a mobile house bottom plate, the upper end of the mobile house bottom plate, close to the two sides of the folding side plates, are fixedly connected with whole plate side plates, two sides of the mobile house top plate, close to the folding side plates, are provided with connecting plates, two sides of the mobile house top plate, close to the whole plate side plates, are provided with locking plates, two sides of the mobile house top plate and the mobile house bottom plate, close to the two sides of the whole plate side plates, are respectively provided with a U-shaped locking interface, the mobile house bottom plate, close to the U-shaped locking interface, is provided with clamping strips, the jacking device is loaded between the clamping strips, and the middle part of one side, close to the U-shaped locking interface, of the jacking device is provided with a pulling plate, the whole is effectual, and stability and practicality are higher, have certain spreading value ", but this mobile home when using, neglected outside the work of inside electric power component needs the power supply source, still need the power under the specific voltage just can assist electric power component normal work, the house body shell is comparatively thin, under the lower condition of night or ambient temperature, the internal portion of room lacks effectual heat preservation measure, make the internal portion of room person of living take place the wind chill easily, influence healthy.

Disclosure of Invention

The invention aims to provide an integrated heat-preservation mobile house to solve the problems in the background technology.

In order to achieve the purpose, the invention provides the following technical scheme: an integrated heat-preservation mobile house comprises a house body and a screening filter plate, wherein an energy storage box body is installed at the top of the house body, the cross section of the energy storage box body is a right-angled triangle, and a C-shaped traction marking frame is installed on the outer wall of one side of the house body;

the surface of one side, close to the room body, of the traction marking frame is provided with a rubber cover in an embedded mode, the inner wall of the rubber cover is provided with three groups of compression springs which are arranged in parallel, the surface of one side, close to the room body, of the traction marking frame is provided with three groups of pressure sensors which are arranged in parallel, the installation positions of the pressure sensors correspond to the compression springs one by one, one ends of the compression springs are correspondingly connected with the surfaces of the pressure sensors, the surface of one side, close to the room body, of the traction marking frame is provided with a GPS (global positioning system) positioner, and the GPS positioner is located between the two groups of pressure sensors;

the water storage frame body is installed on the outer wall of one side of the house body and located below the traction mark frame, and the screening filter plate is installed in the water storage frame body in an embedded mode.

Preferably, one side inner wall of the room body is installed spare signal plate, one side surface mounting that the room body was kept away from to spare signal plate has time-recorder, inquiry terminal and signal intensifier, and inquiry terminal is located the centre of time-recorder and signal intensifier, time-recorder and signal intensifier electric connection.

Preferably, the transformer is installed to the inside diapire of energy storage box body, solar cell panel is installed to the inner wall of energy storage box body, and solar cell panel and transformer electric connection, the protection casing is installed at the top of energy storage box body.

Preferably, the room body comprises waterproof layer, steel sheet and buckled plate, the surface mounting of steel sheet has the waterproof layer, the interior surface mounting of steel sheet has thermal insulation wall, thermal insulation wall's interior surface mounting has the buckled plate.

Preferably, heat preservation wall comprises heat preservation cotton board, insulation board and electric heating board, the insulation board is all installed to the both sides surface of electric heating board, one side surface mounting that the electric heating board was kept away from to the insulation board has the cotton board of heat preservation, and the cotton board of heat preservation keeps away from one side surface of insulation board and the surface connection of buckled plate, electric heating board and transformer electric connection.

Preferably, the universal wheel is all installed in the bottom four corners of the room body, flush mounting plate is installed to one side inner wall of the room body, and flush mounting plate is located the below of reserve signal board, flush mounting plate's surface mounting has three parallel arrangement's of group control switch key.

Preferably, the active carbon otter board is installed to the inner wall of screening filter plate, the internally mounted of screening filter plate has the gomphosis slot, and the inside of gomphosis slot is equipped with the slot that three equidistance of group were arranged, a bushing, No. two bushings and No. three bushings are installed through the slot gomphosis in the inside of gomphosis slot, and a bushing and No. three bushings are located the rear and the place ahead of No. two bushings respectively, the inside of a bushing, No. two bushings and No. three bushings all is equipped with the through-hole, the inside through-hole diameter of a bushing, No. two bushings and No. three bushings reduces in proper order.

Preferably, the inside of the water storage frame body is divided into a water collecting area and a water purifying area through the screening filter plate, and the water purifying area is positioned in front of the water collecting area.

Preferably, the top of the house body is provided with an invaginated through groove, the top wall in the through groove is provided with a rotating fan, the inner wall of the through groove is provided with two groups of ultraviolet lamp tubes which are symmetrically arranged front and back, the two groups of ultraviolet lamp tubes are respectively positioned in front of and behind the rotating fan, the inner wall of the through groove is provided with two groups of lighting lamp tubes which are symmetrically arranged front and back, the two groups of lighting lamp tubes are respectively positioned in front of and behind the ultraviolet lamp tubes, and the lighting lamp tubes, the rotating fan and the ultraviolet lamp tubes are respectively and electrically connected with three groups of control on-off keys on the surface of the switch panel.

Preferably, the working steps of the device are as follows:

s1, when the house body is used as an integrated mobile house to live in, after the solar panel converts the light energy into the electric energy, the corresponding boosting treatment is carried out through the transformer, and the electric energy can be boosted to 220V civil voltage, so that the voltage requirement of the resident people in the house body during electricity utilization can be met, in addition, the access of a power supply wire can be avoided, and the integral load of the house body and the cable laying cost can be reduced;

s2, when the residents need to be intensively transferred in case of sudden natural disasters, the residents can be intensively transferred into the house bodies in batches, a plurality of groups of house bodies are combined in a hooking mode through hooking ropes, then one end of each traction rope is wound on the surface of the traction mark frame on the surface of the house body at the outermost end, and the other end of each traction rope is connected to the tail end of a traction vehicle, so that the centralized transfer can be achieved;

s3, in the process of centralized transfer, the traction rope and the hooking rope can extrude and drag the rubber cover and the compression spring, under the elastic action of the compression spring, the dragging action of the traction rope and the hooking rope on the traction mark frame can be weakened, the traction mark frame can be ensured to be perfectly stored on the surface of the house body, in addition, once the traction rope and the hooking rope break, the corresponding connection and traction action between the house body and between the house body and the traction vehicle is lost, so that the pressure sensor detects that the extrusion action from the compression spring is zero, abnormal warning can be sent to an integrated system in the traction vehicle, a traction vehicle driver can know that the phenomenon of falling behind exists, and the driver can conveniently and quickly find the falling behind house body according to the positioning information displayed by the GPS positioner;

s4, when the house is intensively transferred, the house is affected by natural disasters, communication signals are weakened in the transfer process and cannot be in contact with the outside, at the moment, people in the house can inquire whether an operator base station exists nearby through an inquiry terminal, if the operator base station exists, a signal enhancer can be started, after communication network signals are enhanced, the people can get in contact with different places by means of communication tools such as mobile phones and the like, the current state is a safe state, in the process, the timer can control the starting time of the signal enhancer, and radiation and communication interference influence on other areas caused by long-time use of the signal enhancer are avoided;

s5, in the transferring process, people in the house are concentrated, and the ultraviolet lamp tube and the rotary fan can be started at the moment, so that the sterilization and ventilation treatment of the inner space of the house can be realized, and the occurrence of the germ infection condition is avoided;

s6, when the water-collecting device is parked during transferring, collected rainwater can be stored in the water-collecting area, and after being intercepted by the screening filter plate, water in the water-collecting area is transferred into the water-purifying area through the screening filter plate, so that the water-collecting device is convenient for people to use;

s7, when the temperature is lower at night, the electric heating plate can be started to heat up the interior of the house, the internal temperature of the house is prevented from being too low to cause wind cold, the electric heating plate can be insulated and isolated through the heat insulation cotton plate, and then the house is prevented from exchanging heat with the external environment, so that the power consumption is saved.

Compared with the prior art, the invention has the beneficial effects that:

1. the invention is characterized in that a mark traction frame is arranged and consists of a rubber cover, a compression spring, a pressure sensor and a GPS (global positioning system), the pressure sensor and the GPS are in wireless connection with an integrated management system arranged in a traction vehicle, the friction between a hooking rope or the traction rope and the traction mark frame can be increased through the rubber cover, so as to further strengthen the connection between the hooking rope or the traction rope and the traction mark frame, the hooking rope or the traction rope can extrude the traction mark frame and the rubber cover in the traction transfer process, the compression spring can transmit the extrusion to the pressure sensor in the process, the hooked house body is in effective traction at the moment, in addition, the pulling effect of the traction rope on the traction mark frame can be weakened through the elasticity of the compression spring, the traction mark frame is ensured to be perfectly attached to the outer wall surface of the house body, and the traction rope and the hooking rope are broken, lose corresponding connection traction between the room body and the room body, between the room body and the traction vehicle, so pressure sensors detect that the extrusion effect from compression spring is zero this moment, can send out unusual warning to the inside integrated system of traction vehicle, impel traction vehicle navigating mate to know to have the phenomenon of falling behind, according to the locating information that the GPS locator shows, can make things convenient for the navigating mate to look for the room body of falling behind fast.

2. The invention installs the spare signal board, which is composed of the timer, the inquiry terminal and the signal intensifier, when the signal board is intensively transferred, the signal board is influenced by natural disasters, communication signals are weakened in the transfer process and can not be connected with the outside, at the moment, people in the house body can inquire whether an operator base station exists nearby through the inquiry terminal, if the operator base station exists, the signal intensifier can be started, after the communication network signals are strengthened, the contact with the different places is obtained by communication tools such as mobile phones and the like, the current safety state is indicated, in the process, the timer can control the starting time of the signal intensifier, and the radiation brought by using the signal intensifier for a long time and the influence of communication interference on other areas are avoided.

3. The solar energy storage house is provided with the energy storage box body and consists of the transformer, the solar cell panel and the protective cover, the protective cover is made of toughened glass, the strength is high, the pressure resistance is good, the solar cell panel can be protected while light is allowed to penetrate through, the solar cell panel can convert solar light irradiated on the surface into electric energy, then the electric energy is supplied to related electric facilities in the house body, and in order to ensure safe electricity utilization, the transformer is required to boost the electric energy in the solar cell panel so as to meet the voltage requirement of the safe electricity utilization.

Drawings

FIG. 1 is a schematic view of the overall structure of the present invention;

FIG. 2 is a schematic view of the installation structure of the waterproof layer, the steel plate, the corrugated plate and the thermal insulation wall body of the invention;

FIG. 3 is a schematic view of the installation structure of the thermal insulation cotton plate, the insulation plate and the electric heating plate of the present invention;

FIG. 4 is a schematic diagram of an energy storage case assembly structure according to the present invention;

FIG. 5 is a schematic view of the filter plate assembly of the present invention;

FIG. 6 is a schematic view of an assembly structure of the traction mark frame of the present invention;

FIG. 7 is a schematic view of an assembly structure of the standby signal board according to the present invention;

fig. 8 is a schematic view of the assembled structure of the house body and the through grooves of the present invention.

In the figure: 1. a house body; 101. a waterproof layer; 102. a steel plate; 103. a corrugated plate; 2. a heat-insulating wall body; 201. a heat preservation cotton board; 202. an insulating plate; 203. an electrical heating plate; 3. an energy storage box body; 301. a transformer; 302. a solar panel; 303. a protective cover; 4. screening a filter plate; 401. a tabling slot; 402. a bushing plate I; 403. a second bushing plate; 404. a third bushing plate; 5. drawing the marking frame; 501. a rubber cover; 502. a compression spring; 503. a pressure sensor; 504. a GPS locator; 6. a water storage frame body; 601. a water collection area; 602. a water purification area; 7. a universal wheel; 8. a standby signal board; 801. a timer; 802. inquiring a terminal; 803. a signal booster; 9. a through groove; 901. an illuminating lamp tube; 902. a rotating fan; 903. an ultraviolet lamp tube; 10. a switch panel.

Detailed Description

The technical solutions in the embodiments of the present invention will be clearly and completely described below with reference to the drawings in the embodiments of the present invention, and it is obvious that the described embodiments are only a part of the embodiments of the present invention, and not all of the embodiments. All other embodiments, which can be derived by a person skilled in the art from the embodiments given herein without making any creative effort, shall fall within the protection scope of the present invention.

In the description of the present invention, it should be noted that the terms "upper", "lower", "inner", "outer", "front", "rear", "both ends", "one end", "the other end", and the like indicate orientations or positional relationships based on those shown in the drawings, and are only for convenience of description and simplicity of description, but do not indicate or imply that the referred device or element must have a specific orientation, be constructed in a specific orientation, and be operated, and thus, should not be construed as limiting the present invention. Furthermore, the terms "first" and "second" are used for descriptive purposes only and are not to be construed as indicating or implying relative importance.

In the description of the present invention, it is to be noted that, unless otherwise explicitly specified or limited, the terms "mounted," "disposed," "connected," and the like are to be construed broadly, such as "connected," which may be fixedly connected, detachably connected, or integrally connected; can be mechanically or electrically connected; they may be connected directly or indirectly through intervening media, or they may be interconnected between two elements. The specific meanings of the above terms in the present invention can be understood in specific cases to those skilled in the art.

Referring to fig. 1-8, an embodiment of the present invention is shown: an integrated heat-preservation mobile house comprises a house body 1 and a screening filter plate 4, wherein an energy storage box body 3 is installed at the top of the house body 1, the cross section of the energy storage box body 3 is in a right-angled triangle shape, the house body 1 provides a living space for a device, the energy storage box body 3 can realize energy storage by means of an internal solar cell panel 302, in addition, due to the design of the shape of a triangular slope, rain and snow at the top of the energy storage box body 3 can naturally slide down under the action of gravity when the house body 1 meets rain and snow weather, the phenomenon that water body residual time is overlong and permeates into the house body 1 is avoided, a C-shaped traction marking frame 5 is installed on the outer wall of one side of the house body 1, the use of the traction marking frame 5 can assist a plurality of groups of the house bodies 1 to realize concentrated migration, integrated migration management is realized under the help of an internal pressure sensor 503 and;

the surface of one side of the traction marking frame 5 close to the house body 1 is embedded with a rubber cover 501, the inner wall of the rubber cover 501 is provided with three groups of compression springs 502 which are arranged in parallel, the surface of one side of the traction marking frame 5 close to the house body 1 is provided with three groups of pressure sensors 503 which are arranged in parallel, the installation positions of the pressure sensors 503 are in one-to-one correspondence with the compression springs 502, one end of each compression spring 502 is correspondingly connected with the surface of the pressure sensor 503, the surface of one side of the traction marking frame 5 close to the house body 1 is provided with a GPS (global positioning system) positioner 504, the GPS positioner 504 is positioned between the two groups of pressure sensors 503, the pressure sensors 503 and the GPS positioner 504 are in wireless connection with an integrated management system which is arranged in the traction vehicle, the friction between a hooking rope or the traction rope and the traction marking frame 5 can be increased through the rubber cover 501, the connection between the two is further enhanced, in the traction transfer process, the hooking rope or the traction rope can extrude the traction mark frame 5 and the rubber cover 501, in the process, the compression spring 502 can transmit the extrusion to the pressure sensor 503, which represents that the hooked house body 1 is in effective traction, in addition, the pulling action of the traction rope on the traction mark frame 5 can be weakened through the elasticity of the compression spring 502, the traction mark frame 5 is ensured to be perfectly attached and installed on the outer wall surface of the house body, the traction rope and the hooking rope are broken, the corresponding connection traction action between the house body 1 and between the house body 1 and the traction vehicle is lost, therefore, the pressure sensor 503 detects that the extrusion from the compression spring 502 is zero at the moment, the abnormal warning can be sent to the integrated system in the traction vehicle, the driver of the traction vehicle is prompted to know that the phenomenon of falling behind exists, and according to the positioning information displayed by the GPS positioner 504, the driver can conveniently and quickly find the falling room body 1;

the water storage frame body 6 is installed on the outer wall of one side of the house body 1, the water storage frame body 6 is located below the traction mark frame 5, the screening filter plate 4 is installed in the water storage frame body 6 in an embedded mode, the screening filter plate 4 can perform space division processing on the interior of the water storage frame body 6, and therefore the water storage body can be conveniently stored in a partitioned mode.

Further, a spare signal plate 8 is arranged on the inner wall of one side of the house body 1, a timer 801, an inquiry terminal 802 and a signal enhancer 803 are arranged on the surface of the spare signal plate 8 far away from the house body 1, and the inquiry terminal 802 is located between the timer 801 and the signal enhancer 803, the timer 801 is electrically connected to the signal enhancer 803, when the house is intensively transferred, the communication signals are weakened in the transfer process and cannot be contacted with the outside under the influence of natural disasters, at the moment, people in the house body 1 can inquire whether an operator base station exists nearby through the inquiry terminal 802, if so, the signal enhancer 803 can be started to enhance the communication network signal, and then contact with other places by means of communication tools such as mobile phones, etc., to indicate that the current state is safe, in this process, the timer 801 can control the start time of the signal enhancer 803, so as to avoid the influence of radiation and communication interference in other areas caused by long-time use of the signal enhancer 803.

Further, transformer 301 is installed to the inside diapire of energy storage box body 3, solar cell panel 302 is installed to the inner wall of energy storage box body 3, and solar cell panel 302 and transformer 301 electric connection, protection casing 303 is installed at the top of energy storage box body 3, protection casing 303 is made for toughened glass, intensity is higher, better crushing resistance has, can play the guard action to solar cell panel 302 when allowing light to see through, solar cell panel 302 can convert the sunlight of illumination on the surface into the electric energy, then provide power supply for the inside relevant electric power facility in room body 1, for guaranteeing the safe power consumption, need use transformer 301 to carry out the processing of stepping up with the inside electric energy of solar cell panel 302, in order to satisfy the voltage demand of safe power consumption.

Further, the room body 1 is by waterproof layer 101, steel sheet 102 and buckled plate 103 are constituteed, the surface mounting of steel sheet 102 has waterproof layer 101, the internal surface mounting of steel sheet 102 has thermal insulation wall 2, thermal insulation wall 2's internal surface mounting has buckled plate 103, waterproof layer 101 is made for waterproof material, better waterproof nature has, avoid steel sheet 102 to receive the corrosion influence, and the surface of buckled plate 103 is the corrugate, can play the noise propagation that produces the inside crowd of the room body 1 and block the effect, and then reduce the noise interference between the adjacent room body 1, thermal insulation wall 2 can be to the inside corresponding heating intensification operation of realizing of device, realize the heat preservation effect in the 1 inner space of the room body.

Furthermore, the heat insulation wall 2 is composed of a heat insulation cotton board 201, an insulation board 202 and an electric heating board 203, the insulation board 202 is installed on the outer surface of both sides of the electric heating board 203, the heat insulation cotton board 201 is installed on the outer surface of one side of the insulation board 202 far away from the electric heating board 203, the outer surface of one side of the heat insulation cotton board 201 far away from the insulation board 202 is connected with the surface of the corrugated board 103, and the electric heating board 203 is electrically connected with the transformer 301.

Further, universal wheels 7 are installed at four corners of the bottom of the room body 1, the universal wheels 7 can be moved by an auxiliary device to reduce traction resistance, a switch panel 10 is installed on the inner wall of one side of the room body 1, the switch panel 10 is located below the standby signal board 8, three groups of control switch keys which are arranged in parallel are installed on the surface of the switch panel 10, and the working states of the lighting lamp tube 901, the rotating fan 902 and the ultraviolet lamp tube 903 can be controlled.

Furthermore, an activated carbon screen plate is installed on the inner wall of the screening filter plate 4, an embedding slot 401 is installed inside the screening filter plate 4, three groups of slots are arranged in the embedding slot 401 at equal intervals, a first bushing 402, a second bushing 403 and a third bushing 404 are installed inside the embedding slot 401 in an embedding manner through the slots, the first bushing 402 and the third bushing 404 are respectively positioned behind and in front of the second bushing 403, through holes are respectively formed inside the first bushing 402, the second bushing 403 and the third bushing 404, the diameters of the through holes inside the first bushing 402, the second bushing 403 and the third bushing 404 are sequentially reduced, the through holes arranged inside the first bushing 402, the second bushing 403 and the third bushing 404 are mutually overlapped, the effective flow area of the through holes can be changed, the speed of transferring water inside the water collecting area 601 to the inside of the water purifying area 602 is adjusted, and the time of transferring the water to the inside of the screening filter plate 4 is prolonged, then, the filtering effect is enhanced, so that a first bushing plate 402, a second bushing plate 403, a third bushing plate 404, a first bushing plate 402, a second bushing plate 403, a first bushing plate 402, a third bushing plate 404, a second bushing plate 403, a third bushing plate 404, a first bushing plate 402, a second bushing plate 403 and a third bushing plate 404 can be selectively inserted and connected in the embedding slot 401 according to the quality of the water body in the water collecting area 601, and the purpose of diversified screening and throttling is achieved.

Further, the inside of the water storage frame body 6 is divided into a water collecting area 601 and a water purifying area 602 through the screening filter plate 4, the water purifying area 602 is located in front of the water collecting area 601, the water collecting area 601 is used for collecting rainwater, and the water purifying area 602 is used for storing water subjected to filtering and throttling treatment by the screening filter plate 4, so that the water quality is improved.

Further, the top of the room body 1 is provided with a recessed through groove 9, the inner top wall of the through groove 9 is provided with a rotary fan 902, the inner wall of the through groove 9 is provided with two groups of ultraviolet lamp tubes 903 which are symmetrically arranged in front and back, the two groups of ultraviolet lamp tubes 903 are respectively positioned in front of and behind the rotary fan 902, the inner wall of the through groove 9 is provided with two groups of illuminating lamp tubes 901 which are symmetrically arranged in front of and behind, the two groups of illuminating lamp tubes 901 are respectively positioned in front of and behind the ultraviolet lamp tubes 903, the illuminating lamp tubes 901, the rotary fan 902 and the ultraviolet lamp tubes 903 are respectively electrically connected with three groups of control switch keys on the surface of the switch panel 10, the illuminating lamp tubes 901, the rotary fan 902 and the lamp tubes 903 can be selectively turned on by selecting the control switch keys on the surface of the switch panel 10, after the illuminating lamp tubes 901 are turned on, illuminating light can be provided for the inside of the room body 1, after the rotary fan 902 is turned on, the air circulation speed inside the room body 1 can be enhanced, the ventilation effect is realized, and after the ultraviolet lamp tube 903 is opened, the internal space of the house body 1 can be disinfected and sterilized, so that the possibility of germ infection caused by dense crowds is reduced.

Further, the working steps of the device are as follows:

s1, when the house body 1 is used as an integrated mobile house to live in, after light energy is converted into electric energy through the solar cell panel 302, the electric energy is correspondingly boosted through the transformer 301, and the voltage can be boosted to 220V civil voltage, so that the voltage requirement of people living in the house body 1 during electricity utilization can be met, in addition, the access of a power supply wire can be avoided, and the overall load of the house body 1 and the cable laying cost can be reduced;

s2, when the residents need to be intensively transferred in case of sudden natural disasters, the residents can be intensively transferred into the house bodies 1 in batches, a plurality of groups of the house bodies 1 are hooked and combined through the hooking ropes, then one end of each traction rope is wound on the surface of the traction marking frame 5 on the surface of the house body 1 at the outermost end, and the other end of each traction rope is connected to the tail end of the traction vehicle, so that the centralized transfer can be realized;

s3, in the process of centralized transfer, the traction rope and the hooking rope can extrude and drag the rubber cover 501 and the compression spring 502, under the elastic action of the compression spring 502, the dragging action of the traction rope and the hooking rope on the traction mark frame 5 can be weakened, the traction mark frame 5 can be ensured to be completely stored on the surface of the house body 1, in addition, once the traction rope and the hooking rope are broken, the corresponding connecting and dragging actions between the house body 1 and between the house body 1 and a traction vehicle are lost, so that the pressure sensor 503 can send out abnormal warning to an integrated system in the traction vehicle when detecting that the extruding action from the compression spring 502 is zero, so as to prompt the traction vehicle driver to know the phenomenon of falling behind, and the driver can conveniently find the house body 1 behind according to the positioning information displayed by the GPS positioner 504;

s4, when the house is intensively transferred, the house is affected by natural disasters, communication signals are weakened in the transfer process and cannot be in contact with the outside, at the moment, people in the house 1 can inquire whether an operator base station exists nearby through the inquiry terminal 802, if the operator base station exists, the signal enhancer 803 can be started, after communication network signals are enhanced, the people can be in contact with different places through communication tools such as mobile phones and the like, the current safety state is indicated, in the process, the timer 801 can control the starting time of the signal enhancer 803, and radiation brought by long-time use of the signal enhancer 803 and communication interference influence on other areas are avoided;

s5, in the transferring process, people in the room body 1 are concentrated, and the ultraviolet lamp tube 903 and the rotary fan 902 can be started, so that the sterilization and ventilation treatment of the internal space of the room body 1 can be realized, and the occurrence of the germ infection condition is avoided;

s6, when the water collecting device is stopped during transferring, collected rainwater can be stored in the water collecting area 601, and after being intercepted by the screening filter plate 4, water in the water collecting area 601 is transferred into the water purifying area 602 through the screening filter plate 4, so that the water collecting device is convenient for people to use;

s7, when the temperature is lower at night, the electric heating plate 203 can be started, the temperature rise treatment is carried out on the inside of the room body 1, the wind cold caused by the over-low temperature of the inside of the room body 1 is avoided, the electric heating plate 203 can be insulated and isolated through the heat insulation cotton plate 201, then the heat exchange between the room body 1 and the external environment is prevented, and the power consumption is further saved.

The working principle is as follows: when the house body 1 is used as an integrated mobile house for residence, after light energy is converted into electric energy through the solar cell panel 302, corresponding boosting treatment is carried out through the transformer 301, the electric energy can be boosted to 220V civil voltage, so that the voltage requirement of resident groups in the house body 1 during electricity utilization can be met, in addition, the access of power supply wires can be avoided, the whole load of the house body 1 and the laying cost of cables are reduced, when the residents need to be intensively transferred in sudden natural disasters, the residents can be intensively transferred into the house body 1 in batches, a plurality of groups of the house body 1 are combined by hooking the hooking cables, then one end of the traction cable is wound on the surface of the traction marking frame 5 on the surface of the most outer house body 1, the other end of the traction cable is connected to the tail end of a traction vehicle, the centralized transfer can be realized, and the rubber cover 501 and the compression spring 502 can be extruded and dragged by the traction cable and the hooking cable in the centralized transfer process, under the elastic action of the compression spring 502, the dragging action of the traction rope and the hooking rope on the traction marking frame 5 can be weakened, the traction marking frame 5 can be ensured to be well stored on the surface of the house body 1, in addition, once the traction rope and the hooking rope are broken, the corresponding connection traction action between the house body 1 and between the house body 1 and the traction vehicle is lost, so that the pressure sensor 503 can send out abnormal warning to an integrated system in the traction vehicle when detecting that the extrusion action from the compression spring 502 is zero, so as to prompt a driver of the traction vehicle to know the existence of a phenomenon of falling behind, according to the positioning information displayed by the GPS positioner 504, the driver can conveniently and quickly find the falling behind house body 1, when the centralized transfer is influenced by natural disasters, communication signals are weakened in the transfer process and cannot be connected with the outside, at the moment, a crowd in the house body 1 can inquire whether an operator base station exists nearby through the inquiry terminal 802, if the rainwater in the room body 1 is collected, the rainwater in the water collecting area 601 can be stored in the water collecting area 601 during transfer, after the rainwater is intercepted by the screening filter plates 4, the water in the water collecting area 601 is transferred into the water purifying area 602 through the screening filter plates 4, so that the rainwater is convenient for people to use, and when the temperature at night is low, can start electrical heating board 203, to the inside processing that heaies up that carries on in the room body 1, avoid the wind-cold that the inside temperature in the room body crossed the low initiation, can keep warm to electrical heating board 203 through heat preservation cotton board 201 and keep apart, then prevent the room body 1 and external environment to carry out heat exchange, and then save power consumption.

It will be evident to those skilled in the art that the invention is not limited to the details of the foregoing illustrative embodiments, and that the present invention may be embodied in other specific forms without departing from the spirit or essential attributes thereof. The present embodiments are therefore to be considered in all respects as illustrative and not restrictive, the scope of the invention being indicated by the appended claims rather than by the foregoing description, and all changes which come within the meaning and range of equivalency of the claims are therefore intended to be embraced therein. Any reference sign in a claim should not be construed as limiting the claim concerned.