1. The utility model provides a anticreep type weaving cloth surface fine hair removing device, includes shell (1), its characterized in that: the top inner wall movable mounting of shell (1) has take-up pulley (2), and the below movable mounting of take-up pulley (2) has anticreep roller (3), and the below fixed mounting of anticreep roller (3) has warning frame (4), and its outside movable mounting has outer drive roll (5), and the outside transmission of outer drive roll (5) is connected with conveyer belt (6), and it is connected with interior live-rollers (7) in conveyer belt (6) inboard transmission, and the outside movable mounting of conveyer belt (6) has wind-up roll (8).

2. The separation-preventing type textile fabric surface fluff removing apparatus according to claim 1, characterized in that: the outer side wall of the anti-release roller (3) is movably provided with a spring rod (9), the outer side end of the spring rod (9) is fixedly provided with an anti-release wheel (10), and the inner side end of the anti-release roller and the inner part of the anti-release roller (3) are respectively and fixedly provided with a corresponding conductive block (11).

3. The separation-preventing type textile fabric surface fluff removing apparatus according to claim 1, characterized in that: the bottom of the warning frame (4) is fixedly provided with a magnetic induction coil (12), a magnetic block (13) is arranged below the magnetic induction coil (12), and the magnetic pole of the magnetic block (13) is opposite to the magnetic pole of the opposite surface of the magnetic field generated by the magnetic induction coil (12).

4. The separation-preventing type textile fabric surface fluff removing apparatus according to claim 3, characterized in that: the left side and the right side of the magnetic block (13) are respectively fixedly connected with a limiting ring, the bottom of the magnetic block is provided with a bag pressing plate, the inner side of the limiting ring is connected with a limiting rod in a sliding mode, the outer side of the limiting rod is provided with a power storage spring, an air bag (14) is fixedly arranged below the bag pressing plate, and the outer side of the air bag (14) is fixedly provided with a horn (15) through an air guide tube.

5. The separation-preventing type textile fabric surface fluff removing apparatus according to claim 1, characterized in that: the top movable mounting of conveyer belt (6) has the scraping hair sword (16), and its surface equidistance has seted up the through-hole, and the outside transmission of interior live-rollers (7) is connected with installation area (17), and the lateral surface equidistance fixed mounting of installation area (17) has a section of thick bamboo of breathing in (18), and the inboard sliding connection of a section of thick bamboo of breathing in (18) has piston spring pole (19), and the outside end fixedly connected with pouring weight (20) of piston spring pole (19).

6. The separation-preventing type textile fabric surface fluff removing apparatus according to claim 1, characterized in that: the winding roller is characterized in that a fluted disc (21) is respectively in transmission connection with the inclined upper side and the inclined lower side of the winding roller (8), a gear (22) is meshed with the front side of the fluted disc (21), an annular tooth groove corresponding to the gear (22) is formed in the front surface of the fluted disc, one end of the gear (22) opposite to the conveyor belt (6) is fixedly connected with a fan blade (23), and a fan bin (24) is fixedly mounted on the outer side of the fan blade (23).

7. The separation-preventing type textile fabric surface fluff removing apparatus according to claim 6, characterized in that: the outer side of the upper side fan bin (24) is fixedly provided with a fluff collecting bin (25), the outer side of the lower side fan bin (24) is fixedly provided with a dust collecting bin (26), the fluff collecting bin (25) and the dust collecting bin (26) are respectively provided with a suction nozzle (27) through a guide pipe on the outer side of the conveyor belt (6), and a check plate is movably arranged in the guide pipe.

Background

The textile is taken from a general name of spinning and weaving, but with the continuous development and perfection of a textile knowledge system and a subject system, the textile not only is the traditional spinning and weaving, but also comprises a non-woven fabric technology, a three-dimensional weaving technology, an electrostatic nano-web forming technology and the like, and the surface fluff and dust of the woven fabric are usually required to be removed so as to facilitate the subsequent processing such as dip dyeing uniformity and the like.

Although various textile cloth fluff removing devices exist, some defects still exist, such as the cloth is easy to fall off in the transmission process, and then the work is disordered, and if workers cannot find and adjust the fluff removing devices in time, huge loss is caused; for example, when fluff and dust on the surface of the cloth are removed, the cloth is easy to deviate and cannot be stably removed.

Summary of the invention

Technical problem to be solved

Aiming at the defects of the prior art, the invention provides the anti-falling textile fabric surface fluff removing equipment which has the advantages of falling prevention, warning, fluff and dust removal stability and the like, and solves the problems that the existing equipment cannot fall off and warn and cannot remove fluff and dust stably.

(II) technical scheme

In order to realize the purposes of preventing falling off, warning and stably removing fluff and dust, the invention provides the following technical scheme: the utility model provides an anticreep type weaving cloth surface fine hair removal equipment, includes the shell, the top inner wall movable mounting of shell has the take-up pulley, and the below movable mounting of take-up pulley has the anticreep roller, and the below fixed mounting of anticreep roller has warning frame, and its outside movable mounting has outer driving roller, and the outside transmission of outer driving roller is connected with the conveyer belt, and it is connected with interior live-rollers in the inboard transmission of conveyer belt, and the outside movable mounting of conveyer belt has the wind-up roll.

Preferably, the outer side wall of the anti-release roller is movably provided with a spring rod, the outer side end of the spring rod is fixedly provided with an anti-release wheel, the inner side end of the spring rod and the inner part of the anti-release roller are respectively and fixedly provided with corresponding conductive blocks, and the equipment runs normally when the conductive blocks on the two sides are in contact with each other.

Preferably, the bottom of the warning frame is fixedly provided with a magnetic induction coil, a magnetic block is arranged below the magnetic induction coil, the magnetic pole of the magnetic block is opposite to the magnetic pole of the opposite face of the magnetic field generated by the magnetic induction coil, the opposite poles attract each other, and the magnetic block is driven to slide towards the direction of the magnetic field generated by the magnetic induction coil.

Preferably, the left side and the right side of the magnetic block are fixedly connected with limiting rings respectively, a bag pressing plate is installed at the bottom of the magnetic block, a limiting rod is connected to the inner side of the limiting ring in a sliding mode, a force storage spring is installed on the outer side of the limiting rod, the limiting magnetic block can only slide up and down, an air bag is fixedly installed below the bag pressing plate, a horn is fixedly installed on the outer side of the air bag through an air guide tube, and air inside the air bag can be squeezed into the horn to make a sound through the bag pressing plate.

Preferably, the top movable mounting of conveyer belt has the scraping hair sword, and its surface equidistance has seted up the through-hole, and the conveyer belt inboard is breathed in and is made the cloth paste cover its surface, and the outside transmission of interior live-rollers is connected with the installation area, and the lateral surface equidistance fixed mounting of installation area has a section of thick bamboo of breathing in, and the inboard sliding connection of a section of thick bamboo of breathing in has a piston spring pole, and the outside end fixedly connected with pouring weight of piston spring pole.

Preferably, the oblique top and the oblique below of wind-up roll transmission respectively are connected with the fluted disc, and the front side meshing of fluted disc is connected with the gear, and its front surface sets up the annular tooth's socket that corresponds with the gear, and the fluted disc rotation drives the gear and rotates, and the gear is connected with the flabellum with the relative one end fixedly connected with flabellum of conveyer belt, and the outside fixed mounting of flabellum has the fan storehouse.

Preferably, the outer side of the upper side fan bin is fixedly provided with a fluff collecting bin, the outer side of the lower side fan bin is fixedly provided with a dust collecting bin, the fluff collecting bin and the dust collecting bin are respectively provided with a suction nozzle outside the conveyor belt through a guide pipe, and a check plate is movably arranged in the guide pipe to prevent fluff and dust from flowing out.

(III) advantageous effects

Compared with the prior art, the invention provides the anti-falling textile fabric surface fluff removing equipment which has the following beneficial effects:

1. this anti-drop type weaving cloth surface fine hair removal equipment, it is taut with the cloth through tensioning wheel pair, it is stable tentatively to realize the cloth conveying, the cloth cooperates the anticreep wheel at the in-process of conveying to drive the anticreep roller and rotates, the anticreep roller is at the rotation in-process, the conducting block of spring beam medial extremity is all the time and the inside conducting block contact circular telegram of anticreep roller, when meeting accident, the cloth breaks away from the anticreep wheel, the spring beam makes the conducting block separation outage to the outside slip, then the magnetic field that magnetic induction coil produced disappears, the magnetic path is no longer attracted, under the effect of power storage spring, the magnetic path resets the extrusion gasbag downwards, the inside gas of gasbag is squeezed into loudspeaker, loudspeaker send the sound and warn, so that the staff in time handles, thereby anti-drop and the effect of warning have been reached.

2. According to the anti-falling textile fabric surface fluff removing device, the fabric is continuously conveyed through the conveying belt, the fluff on the surface of the fabric is scraped by the fluff scraping knife, in the conveying process, the outer rotating roller rotates to drive the inner rotating roller to rotate, the inner rotating roller rotates to drive the mounting belt to transmit, the mounting belt transmits to drive the air suction cylinder to transmit, under the gravity action of the weight, when the air suction cylinder transmits to the upper side, the weight drives the piston spring rod to slide downwards, the air suction cylinder sucks air, so that the fabric adsorbs the surface of the conveying belt, the work is stable, dust in the fabric is sucked, and when the air suction cylinder transmits to the lower side, the dust is ejected out in a similar manner; the gear disc is driven to rotate through rotation of the winding roller, the gear disc drives the gear to rotate, the gear rotates to drive the fan blades to rotate, then outside-in suction force is generated, the suction nozzle is matched with the suction nozzle to suck fluff into the fluff collecting bin and dust into the dust collecting bin, and therefore the effect of stably removing fluff and dust is achieved.

Drawings

FIG. 1 is a front sectional view of the present invention;

FIG. 2 is a cross-sectional view of the anti-falling frame;

FIG. 3 is an enlarged partial view of the portion A shown in FIG. 1;

FIG. 4 is a cross-sectional view of a related configuration of the conveyor belt of the present invention;

FIG. 5 is a partial enlarged view of the portion B shown in FIG. 4 according to the present invention.

In the figure: 1. a housing; 2. a tension wheel; 3. a drop-proof roller; 4. a warning frame; 5. an outer rotating roller; 6. a conveyor belt; 7. an inner rotating roller; 8. a wind-up roll; 9. a spring lever; 10. an anti-drop wheel; 11. a conductive block; 12. a magnetic induction coil; 13. a magnetic block; 14. an air bag; 15. a horn; 16. a shaving knife; 17. mounting a belt; 18. an air suction cylinder; 19. a piston spring rod; 20. a weight block; 21. a fluted disc; 22. a gear; 23. a fan blade; 24. a fan bin; 25. a fluff collecting bin; 26. a dust collection bin; 27. a suction nozzle.

Detailed Description

The technical solutions in the embodiments of the present invention will be clearly and completely described below with reference to the drawings in the embodiments of the present invention, and it is obvious that the described embodiments are only a part of the embodiments of the present invention, and not all of the embodiments. All other embodiments, which can be derived by a person skilled in the art from the embodiments given herein without making any creative effort, shall fall within the protection scope of the present invention.

Referring to fig. 1-5, an anti-drop textile fabric surface fluff removing device comprises a shell 1, wherein a tensioning wheel 2 is movably mounted on the inner wall of the top of the shell 1, an anti-drop roller 3 is movably mounted below the tensioning wheel 2, a warning frame 4 is fixedly mounted below the anti-drop roller 3, an outer driving roller 5 is movably mounted on the outer side of the anti-drop roller, a conveying belt 6 is connected to the outer side of the outer driving roller 5 in a transmission manner, an inner rotating roller 7 is connected to the inner side of the conveying belt 6 in a transmission manner, and a winding roller 8 is movably mounted on the outer side of the conveying belt 6.

The outer side wall of the anti-drop roller 3 is movably provided with a spring rod 9, the outer side end of the spring rod 9 is fixedly provided with an anti-drop wheel 10, the inner side end of the anti-drop roller 9 and the inside of the anti-drop roller 3 are respectively and fixedly provided with corresponding conducting blocks 11, the conducting blocks 11 on the two sides are electrified when in contact, the device runs normally, the bottom of the warning frame 4 is fixedly provided with a magnetic induction coil 12, a magnetic block 13 is arranged below the magnetic induction coil 12, the magnetic pole of the magnetic block 13 is opposite to the magnetic pole of the opposite face of the magnetic field generated by the magnetic induction coil 12, the opposite poles attract each other, and the magnetic induction coil 12 drives the magnetic block 13 to slide towards the direction of the magnetic block after generating the magnetic field.

The left side and the right side of the magnetic block 13 are fixedly connected with limiting rings respectively, a bag pressing plate is installed at the bottom of the magnetic block, a limiting rod is connected to the inner side of the limiting ring in a sliding mode, a power storage spring is installed on the outer side of the limiting rod and used for limiting the magnetic block 13 to only slide up and down, an air bag 14 is fixedly installed below the bag pressing plate, a horn 15 is fixedly installed on the outer side of the air bag 14 through an air guide pipe, air inside the air bag 14 can be squeezed into the horn 15 by the bag pressing plate to make sound, a fur scraping knife 16 is movably installed above the conveyor belt 6, through holes are formed in the surface of the fur scraping knife at equal intervals, the inner side of the conveyor belt 6 sucks air to enable cloth to be attached to the surface of the conveyor belt, an installation belt 17 is connected to the outer side of the inner rotating roller 7 in a transmission mode, air suction cylinders 18 are fixedly installed on the outer side surfaces of the installation belt 17 at equal intervals, piston spring rods 19 are connected to the inner sides of the air suction cylinders 18 in a sliding mode, and heavy blocks 20 are fixedly connected to the outer side ends of the piston spring rods 19.

The oblique upper side and the oblique lower side of the wind-up roll 8 are respectively connected with a fluted disc 21 in a transmission manner, the front side of the fluted disc 21 is connected with a gear 22 in a meshing manner, an annular tooth groove corresponding to the gear 22 is formed in the front surface of the fluted disc 21, the fluted disc 21 rotates to drive the gear 22 to rotate, one end of the gear 22, which is opposite to the conveyor belt 6, is fixedly connected with a fan bin 23, the outer side of the fan blade 23 is fixedly provided with a fan bin 24, the outer side of the upper fan bin 24 is fixedly provided with a fluff collecting bin 25, the outer side of the lower fan bin 24 is fixedly provided with a dust collecting bin 26, the fluff collecting bin 25 and the dust collecting bin 26 are respectively provided with a suction nozzle 27 through a guide pipe in the outer side of the conveyor belt 6, and a check plate is movably arranged in the guide pipe to prevent fluff and dust from flowing out.

The working principle is as follows: this equipment is got rid of to fine hair on anticreep type textile fabric surface, it is taut with the cloth through take-up pulley 2, it is stable tentatively to realize the cloth conveying, the cloth cooperates anticreep wheel 10 at the in-process of conveying to drive anticreep roller 3 and rotates, anticreep roller 3 is at the rotation in-process, conducting block 11 of 9 medial extremes of spring beam is the circular telegram with the inside conducting block 11 contact of anticreep roller all the time, when meeting accident, the cloth breaks away from anticreep wheel 10, spring beam 9 slides to the outside and makes conducting block 11 separate the outage, then the magnetic field that magnetic induction coil 12 produced disappears, magnetic path 13 is no longer attracted, under the effect of holding the power spring, magnetic path 13 resets extrusion gasbag 14 downwards, 14 inside gas of gasbag is crowded loudspeaker 15, loudspeaker 15 sends out sound warning, in order to in time handle, thereby anti-drop and warning effect has been reached.

The cloth is continuously conveyed through the conveyor belt 6, the fluff on the surface of the cloth is scraped by the fluff scraping knife 16, in the conveying process, the outer rotating roller 5 rotates to drive the inner rotating roller 7 to rotate, the inner rotating roller 7 rotates to drive the mounting belt 17 to transmit, the mounting belt 17 drives the air suction cylinder 18 to transmit, under the action of gravity of the weight block 20, when the air suction cylinder 18 transmits to the upper side, the weight block 20 drives the piston spring rod 19 to slide downwards, the air suction cylinder 18 sucks air, so that the cloth adsorbs the surface of the conveyor belt 6, the work is stable, dust in the cloth is sucked, and when the air suction cylinder 18 transmits to the lower side, the dust is sprayed out in a same way; and then the winding roller 8 rotates to drive the fluted disc 21 to rotate, the fluted disc 21 rotates to drive the gear 22 to rotate, the gear 22 rotates to drive the fan blades 23 to rotate, and then outside-in suction force is generated, and the suction nozzle 27 is matched to suck fluff into the fluff collecting bin 25 and suck dust into the dust collecting bin, so that the effect of stably removing the fluff and the dust is achieved.

Although embodiments of the present invention have been shown and described, it will be appreciated by those skilled in the art that changes, modifications, substitutions and alterations can be made in these embodiments without departing from the principles and spirit of the invention, the scope of which is defined in the appended claims and their equivalents.